【器材試聽 】Lyra Delos 動圈唱頭

Lyra Delos 動圈唱頭

產品查詢：豐寧音響

地址：旺角亞皆老街86號昌明大廈4樓C室

電話：0852 23228515

Facebook連結：https://www.facebook.com/fungningaudio

代理：聲望音響

香港(陳列室)

香港中環砵甸乍街 24-26 號寶城大廈 1 樓

(852) 2130 1928

九龍灣(陳列室)

九龍灣常悅道 9 號企業廣場 1 期 2 座 3 樓 301 室

(852) 2156 0789

http://www.avantgardehongkong.com/ct/contact

Lyra Delos 零售價：HK$15,990

Specifications for Lyra Delos

Designer: Jonathan Carr

Builder: Yoshinori Mishima (final build, testing), Akiko Ishiyama (primary build)

Type: Medium weight, medium compliance, low-impedance moving coil cartridge

Stylus: Namiki microridge line-contact nude diamond stylus (2.5um x 75um), surface-mounted

Cantilever system: Solid boron rod with short one-point wire suspension, directly mounted into cartridge body

Body: Anodized aluminum

Coils: 3-layer deep, 6N high-purity copper, square-shaped permalloy former, 6.3ohm self-impedance, 9.5uH inductance

Output voltage: 0.6mV@5cm/sec., zero to peak, 45 degrees (CBS test record, other test records may alter results)

Frequency range: 10Hz ~ 50kHz

Channel separation: Greater than 30dB at 1kHz

Compliance: Approx. 12 x 10cm/dyne at 100Hz

Cartridge mounting screws: 2.6mm 0.45 pitch JIS standard

Distance from mounting holes to stylus tip: 9.5mm

Cartridge weight (without stylus cover): 7.3g

Tracking force: 1.65g – 1.75g (1.72g recommended)

Recommended load directly into MC phono input: 97.6ohm ~ 806ohm (detailed guidelines in instruction manual, finalize by listening)

Recommended load via step-up transformer: Use a step-up transformer designed for 5 – 10 ohms cartridge impedance (step-up transformer’s output must be connected to 10kohm ~ 47kohm MM-level RIAA input, preferably via short, low-capacitance cable)

Recommended tonearms: Medium to Medium-High mass arms recommended